Pipe couplings with axial gripping capacity for connecting metal tubes. The anchoring ring with conically stamped teeth grips into the surface of the pipe (steel, stainless steel or cast iron) and provides a safe and high axial tensile strength. Thanks to the special design of the connector, it can even withstand strong vibrations. • Dual-lip sealing system. • Heavy locking bars. • Anchoring ring with conical gripping teeth. Grip couplings for tube diameters from 26.9 mm to 609.6 mm. Available with EPDM or NBR seal.

Blasting is a surface treatment process in which abrasive media is propelled at high pressure to remove contamination, rust, and old coatings, and to prepare the surface for protective coating.

Jooren Shipscrews has developed an edge, the 'Green Screw Edge', which allows the ship's propeller to cut through the water with less resistance. Because you have less resistance, you can reach the same speed by sailing at lower revs. So you save fuel. So you get the same speed on average with 30/40 rpm less. As a result, Jooren Scheepsschroef has become a GREEN AWARD INCENTIVE PROVIDER. We grant inland vessels with a Green Award certificate a 25% discount on the 'Green Screw Edge'. The 'Green Screw Edge' contributes to fuel savings and noise reduction. This fits in perfectly with Green Award's mission: making shipping more sustainable in which the efforts of the ship owners are rewarded. It has also been scientifically tested through a CFD test at VICUSDT in Spain and at Flowcenter in Dordrecht. So do you already sail with your ships with this edge??

HOMA pumps with cutting systems have been technical market leading solutions for decades. Based on this extensive experience, the new Alligator chopper pump series sets new standards for performance and reliability. When it comes to cost effectiveness in particular, the high effciency of the new OC hydraulics is groundbreaking.

The waterjet has many advantages over conventional screw drives: - To be used on shallow draft - No parts rotating outside the hull (lifeboats) - Good maneuvering properties, even at low sailing speeds - Great comfort and ease of use - Good propulsion efficiency at higher speeds - Low maintenance costs and easily replaceable in emergencies The water jets can be supplied with impellers from 200 mm to approx. 1000 mm at capacities from 100 kW to 5500 kW. There are five types of jets - HJX Series, Improved performance and easier installation - HTX Series, fast and manoeuvrable - HJ-Series, for ships up to 20 meters - HM-Series for ships from 20 to 60 meters - HT-Series, for ships from 60 meters

Han® Ex connectors are designed to meet the intrinsic safety requirements for ignition protection in explosion-hazard areas zones 1 and 2. With the Han® Ex series, HARTING offers a comprehensive connection system consisting of hoods, housings, inserts and cable glands. Hoods and housings are made from an alloy that can safely be used in a methane-coal atmosphere. In addition, hoods and housings offer protection IP65 (in the mated position). Furthermore, the hood’s/housing’s blue colour indicates that an intrinsically safe circuit is present. The inserts compatible with Han® Ex allow for high-density contact arrangements, meeting the standards of the category intrinsically safe even in the tightest of spaces.

Powerful hand cleaner with natural scrubbers for removing heavy duty industrial soiling. It’s unique product formulation easily removes stubborn soiling like oil, grease, tar, ink, adhesive and paint. Cleans and moisturizes the hands and prevents skin irritation. > 100% natural scrubber > Dermatologic tested > Solvent free > Bio degradable Available in: 3l.

With the Han® HPR HPTC, HARTING offers durable interfaces for high currents in energy applications. As simple and safe as possible. The connectors of the series are characterised by a high energy density: they are designed for operating voltages up to 3.6 kV/1400A (AC/DC) and can withstand environmental influences such as salt spray, dirt and high humidity (IP 68/69). The interface components are designed to be extremely robust so that power transmission between generators, converters and transformers remains stable in the long term.

Energy storage systems (ESS) require interfaces which are compact and generate as little heat as possible, even when transmitting high currents. HARTING has developed the Han® S series for this application area. The cable side consists of angled housings, with the input side freely rotating around 360 degrees when plugged in. This makes the cables which connect the ESS modules more flexible. Storage modules can also be combined into larger units. Previously, 200 A was the maximum power rating. The power capacity of the new Han® S 450 Plus has been increased to 500 A to meet the demand for higher charging and discharging currents for battery storage. The enlarged contacts and housings are designed so that they do not overheat during operation. HARTING has developed larger housings for contacts with three different conductor cross-sections: - for 95 mm² (AWG 3/0 or 4/0) up to 350 A - for 120 mm² (250 kcmil) up to 400 A - and for 150 mm² (300 kcmil) up to 450 A Robustness and ease of use are also benefits of the Han® interface: it is guaranteed to withstand up to 500 mating cycles, which no other comparable product can offer. The colours red for positive and black for negative, as well as additional colour options of blue and orange, make Han® S connections easily identifiable. In addition, the housings feature a double locking system and numerous coding options, including the use of five different mating profiles. If a cell in an energy storage module shows a drop in performance, the respective management system can switch it off so it can be replaced. To do so, the Han® S interfaces of the adjacent modules are simply turned aside in the locked state to make room for the switch-out. Han® S complies with all relevant standards for energy storage systems, including UL 1977, UL 4128 and 2PfG 2740/01.25 (TÜV Rheinland).

- 5.500 kg on layer 1 / 2781 kg on layer 6 - Holdingforce 15.000 kg on layer 1 - Applicable for anchors up to 1.850 kg - Working pressure 180 bar - Starting pressure 200 bar - Oilflow approx. 40 ltr / min - Advised cable ø 26 mm - T1–L3-M2 (according FEM 1.001 en ISO 4301/1) - Usertemperture -10° tot +40° Celsius - Bandbrake with stainless steel spindle - Manual clutch with stainless steel handle - Weight 730 kg - Surface treatment 3- layer RAL5010 + zinc-nickel alloy - Available with capstandhead, cable and controls

- 5.500 kg on layer 1 / 2781 kg on layer 6 - Outside drums applicable for anchor handling, middle drum for mooring and rope storage - Holdingforce 15.000 kg on layer 1 - Applicable for anchors up to 1.850 kg - Working pressure 180 bar - Starting pressure 200 bar - Oilflow approx. 40 ltr / min - Advised cable ø 26 mm - Cable capacity 3x 74 mtr - T1–L3-M2 (according FEM 1.001 en ISO 4301/1) - Usertemperture -10° tot +40° Celsius - 3x Bandbrake with stainless steel spindle - 3x Manual clutch with stainless steel handle - Surface treatment 3- layer RAL5010 + zinc-nickel alloy - Available with capstandhead, cable and controls